FALL PROTECTION FOR TOOLS

Quick Wrap Tape

  • Conforms to the shape of whatever it is applied to
  • Used with D-rings (on right) and Tool Cinch Attachments to create instant tethering points on virtually any tool
  • Made from a self-fusing silicone rubber that leaves no adhesive or residue behind
  • Inner fiberglass webbing increases the strength of the tape and makes the tape resistant to sharp objects
1500044        Quick Wrap, Yellow Heavy Duty 1" Wide
1500035        Quick Wrap, Blue Heavy Duty 1" Wide
 

Tool Cinch Attachments

  • Tool Cinch Attachments feature a cinch design that allows users to quickly secure equipment up to 35 pounds or 80 pounds
  • Stabilization Wings can be used to keep Tool Cinch Attachments in place using Quick Wrap Tape
 

Hard Hat Tethers

  • The Hard Hat Tether utilizes a compact coil design that keeps the lanyard out of the way of the user
  • Built with lightweight vinyl that's easy to clean
 

D-rings

  • D-rings can be attached to virtually any tool under 5 pounds or 2 pounds using Quick Wrap Tape
  • Creates an instant attachment point in less than a minute
  • Dual D-rings allow for 100% tool tie-off during tool transfers
 

D-ring Cords

  • Easily cinches to tools weighing up to 5 pounds
  • Simply pass the loop end of a D-ring Cord through a pre-drilled hole or closed handle to create an instant attachment point
  • Extremely durable, and reusable
 

Bungee Tethers

  • Built to be more durable and last longer than the competition, Bungee Tethers are third-party load rated, and thoughtfully designed to prevent dropped objects
  • Bungee Tethers carabiners feature screw locks that prevent accidental opens

1500047    Hook2Loop Bungee Tethers, 10 Pound Load Rating
1500048    Hook2Loop Bungee Tethers, 10 Pound Rating, 10 per Pack

 

IMPACT TO THE HEAD

3M™ H-700 Series Hard Hat

  • Engineered to help provide extended comfort, head protection, balance and stability
  • Comfortable smooth, easy turning 4-point ratchet suspension and standard brow pad
  • Unique top of hat design with a short brim
  • Suspension system with height adjustment sits lower on head to reduce pressure
  • Accessory slots
  • H-700 series hard hat (non-vented) meets the requirements of ANSI/ISEA 89.1-2009 Type I, Class C, G and E

H-702R    Yellow Hard Hat with Ratchet Suspension

3M™ H-800 Series Hard Hat

  • Comfortable suspension sits lower on head to reduce pressure points and increase security, especially when looking up and bending down
  • Optional Uvicator™ Sensor lets wearer know when to replace hard hat due to UV exposure
  • Made in U.S.A. with globally sourced materials
  • Smooth, easy turning ratchet suspension with 3 levels of height adjustment
  • Absorbent brow pad provides comfort and ventilation
  • Vented H-800 hard hats meet ANSI/ISEA Z89.1-2009 Type I, Class C requirements

H-801V            White Vented Full Brim Hard Hat with Ratchet
H-801R-UV      White Full Brim Hard Hat with Ratchet and UV

 

RESPIRATORY EXPOSURE

3M™ Versaflo™ S-Series Headcovers for Powered and Supplied Air Respirators

  • Designed to provide users with the optimal level of comfort
  • As a part of Versaflo respirator systems, S-Series hoods and headcovers can be used in dozens of different Powered Air Purifying Respirator and Supplied Air Respirator combinations
  • Directs a comfortable stream of air into the headgear
  • Assigned Protection Factor (APF) of 1000 for the S-Series hoods when used as part of a NIOSH-approved powered or supplied air respirator system

S-133L-5    Headcover with Integrated Head Suspension, White, Medium to Large, 5 per Case

3M™ Half Facepiece 6000 Series, Reusable

  • The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters
  • Helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL)
  • The swept back design of the cartridges helps improve balance and visibility
  • Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user
  • Replaceable cartridges help reduce waste and costs over time
  • Each respirator comes with a reusable storage bag
  • NIOSH approved - all respirators and respirator/filter assemblies must be used in accordance with all instructions and applicable safety and health regulations

6100    Small Half Facepiece 6000 Series
6200    Medium Half Facepiece 6000 Series
6300    Large Half Facepiece 6000 Series
2091    Particulate Filter, P100, 2 per Bag, 50 Bags per Case

3M™ Particulate Respirator, N95

  • Disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95‰ filtration efficiency against certain non-oil based particles
  • Designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations
  • The 8511 has a soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable
  • Braided headbands and an adjustable M-Noseclip
  • Respirator incorporates 3M's proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing
  • The proprietary 3M™ Cool Flow valve is designed to release hot, humid exhaled breath

8511    Particulate Respirator, N95, 10 per Box

EXPOSURE TO NOISE

3M™ E•A•Rfit™ Dual-Ear Validation System

  • Dual-element, dual-microphone assembly is the key to the system, measuring sound levels inside and outside the hearing protector
  • Science-based, quantitative testing gives accurate reports of hearing protection
  • Fast, clear, accurate results are obtained in just seconds and can be printed or saved electronically for future reference
  • System determines personal attenuation rating (PAR) of individual workers and helps remove measurement, fitting, and spectral uncertainty

393-1100    E•A•Rfit™ Validation System

3M™ Peltor™ Optime™ 105 Earmuff

  • Twin-Cup® headband distributes weight for low-pressure fit
  • Patented Twin-Cup® design
  • Noise Reduction Rating (NRR): 30 dB, Class AL

H10A    Optime™ 105 Over-the-Head Earmuffs, NRR 30 dB

3M™ E•A•Rfit™ Classic™ Corded Earplugs-Econo Pak

  • An economical, reliable choice in hearing protection and conservation
  • Slow recovery, low-pressure foam conforms to the shape of the earcanal to help create a comfortable, snug noise barrier
  • Poly bag version keeps disposable earplugs available
  • Econopack version gives you the best value
  • Flame-resistant and moisture-resistant
  • Bright yellow color provides a quick visual compliance check
  • Noise Reduction Rating (NRR): 29 dB, CSA Class AL
  • Test compatible with 3M™ E•A•Rfit™ Validation System

311-1081    Classic™ Econo Pak Earplug, Corded, 500 Pairs per Box

3M™ PELTOR™ WorkTunes™ 26 Digital Radio Hearing Protector Headset

  • Offers five AM/FM presets
  • Uses 3.5 mm jack for audio input
  • Provides excellent reception with no interference, even in harsh conditions
  • Protects hearing with a Noise Reduction Rating of 26 dB

WTD2600    WorkTunes™ 26 Digital Radio Hearing Protector Headset

 

FOREIGN BODY EYE INJURIES

3M™ Solus™ 1000-Series Safety Eyewear with 3M™ Scotchgard™ Coating

  • Soft nosebridge for added comfort
  • Elastic strap
  • Removable temple
  • Polycarbonate lenses absorb 99.9% of UV
  • 3M™ Scotchgard™ Anti-Fog Technology brings higher anti-fog performance* to safety eyewear, helping workers see more clearly to complete on-the-job task
  • 3M™ Scotchgard™ Anti-Fog Coating resists fogging longer than traditional anti-fog coatings, even after washing multiple times
  • One size fits most
  • Meets the requirements of ANSI Z87.1 and CSA Z94.3

*Based on 3M internal testing per EN168 test method when compared to traditional anti-fog coatings.

S1201SGAF    Solus™ 1000-Series, Green/Black, Clear Scotchgard™ Anti-Fog

3M™ SecureFit™ Eyewear

  • Proprietary self-adjusting 3M™ Pressure Diffusion Temple Technology – a scientific advancement that helps diffuse pressure over the ear, enhancing frame comfort while at the same time ensuring a secure fit across diverse workforces
  • Self-adjusts to fit a wide array of head sizes, reducing the need to stock multiple frame sizes
  • Contemporary design weighs less than 1 ounce for lightweight comfort
  • Provides a secure, snug fit without compromising comfort
  • Available anti-fog coating helps keep lenses free of moisture in hot and humid condition
  • Polycarbonate lens absorbs 99.9% UVA and UVB
  • Meets the requirements of CSA Z94.3 and ANSI Z87.1-2010

SF201AF    SecureFit™, Clear Frame, Clear Anti-Fog Lens

3M™ Virtua™ Protective Eyewear

  • Open, unobstructed viewing range
  • Sleek styling for both men and women
  • Lightweight Virtua™ weighs less than 1 ounce
  • Polycarbonate lens absorbs 99.9% UV
  • Contoured temples for comfortable fit
  • Meets the High Impact Requirements of ANSI Z87.1-2003

11329-00000-100    Clear Frame, Clear, Anti-Fog Coated

3M™ Virtua™ CCS Protective Eyewear with Foam Gasket

  • Removable, foam-lined gasket helps limit eye exposure to nuisance dust while providing added comfort and cushioning
  • Small vents in the gasket help minimize fogging
  • Lenses meets the requirements of CSA Z94.3-07-impact rated to ANSI Z87.1-2010

11872-00000-20    Virtua™ CCS with Foam Gasket, Blue Frame, Clear Anti-Fog Lens
 

 

FALLS FROM HEIGHT

Saflok™ Tie-Off Strap

  • Meet 3600 pound gate requirement Z359.1
  • Specifically designed to connect a fall protection device to an anchorage
  • Designed to be wrapped around a beam or similar structure
  • Complete with pass-thru D-Rings, 1 3/4" polyester strength member and a 3" wear pad for abrasion resistance 5,000 pound tensile strength for added security

1003000    3' Web Tie-Off Adaptor, Pass-thru Type
1003006    6' Web Tie-Off Adaptor, Pass-thru Type

Delta™ Comfort Construction-Style Positioning Harness

  • Sewn-in dorsal pad holds personal SRLS and locks the pad in place to eliminate slippage
  • Impact indicators provide a visual alert that the harness has been involved in a fall and for safety inspections
  • Rigid belt allows for 60 pounds of tools without collapsing
  • Tongue buckle legs for fast and easy adjustments
  • Padding with built-in vent windows allow for direct air contact to help cool the worker
  • Revolver™ Vertical Torso Adjusters eliminates loose ends and locks into place to prevent slippage
  • I-Safe™ equipped
  • Additional styles available

Back and Side D-rings, Belt with Pad, Tongue Buckle Leg Straps, Comfort Padding

1100797    Delta™ Comfort Construction Style Positioning Harness, Large
1100798    Delta™ Comfort Construction Style Positioning Harness, Extra Large
 

Rebel™ Self Retracting Lifeline

  • Rebel™ is a fall protection solution that doesn't compromise budgets or safety and gives workers added mobility
  • Incorporates a lifeline that extends and retracts automatically, allowing unhindered movement around the work area
  • A brake activates in the event of a fall, stopping the worker within inches and limits arresting forces to OSHA and ANSI requirements
  • Continues to set performance standards beyond compliance, while providing a substantial value compared to competitive models
  • Comes with durable thermoplastic housing and a carabiner for connection to an anchor point

3590500    Rebel™ 33' Self Retracting Lifeline with 3/16" Galvanized Cable with Swiveling Snaphook, Red

Product questions? Contact us at This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Service and Repair questions? Call Our Service and Repair Center for Details 800-888-4642 • 314-426-5600 or contact Kevin Mantle at This email address is being protected from spambots. You need JavaScript enabled to view it.